Configure BODYCAM 4 Dock to In-vehicle Router

 

Vehicle Network Configuration

To connect a BODYCAM 4 dock in a vehicle, the dock must be connected to an in-vehicle 4G router via Ethernet, or to a laptop with a 4G connection via Ethernet.

In-Vehicle Router:

Connect an Ethernet cable from the Ethernet port of the docking station to an open Ethernet port on the in-vehicle router. The router will then assign the camera and the IP. Test the setup by docking a configured camera while the router is powered on and connected and then ensure that the camera gets a network connection.

bodycam4-in-vehicle.png

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more
Our helpline hours:
8:00am - 7:00pm EDT Monday to Friday
Follow us on LinkedIn
Get the latest news and updates first