BODYCAM 4: Viewing Camera Info in Dock

The BODYCAM 4 can display important information to the user when the camera is placed in a docking station.

  1. Place the camera in a single or multi docking station.
  2. The camera will power on (if not already powered on)
  3. Press the F1 button once on the side of the camera to step through each of the following informational views on the camera's display:
    • Firmware Version: (Example: "BC4_1_9_2")
    • Ethernet IP Address: (Example: "ETH IP 192.168.41.17") If ethernet is not connected to the dock, it will display "N/A"
    • Wi-Fi IP Address: (Example: "WIFI IP 192.168.1.1") If Wi-Fi is not enabled, it will display "Disabled"

    • Date/Time: (Example: "2024/03/25-14:23:16")

    • 4G IMEI: (Example: "IMEI 868105043114428") If the camera does not have 4g, this page will not be displayed.
    • 4G SIM: (Example: "SIM 890199000004489823") If the camera does not have 4g, this page will not be displayed.
    • 4G APN: (Example: "APN vzwinternet") If the camera does not have 4g, this page will not be displayed. 

    • Normal docked information: The camera will cycle back to the normal information view that is displayed when docked.
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more
Our helpline hours:
8:00am - 7:00pm EDT Monday to Friday
Follow us on LinkedIn
Get the latest news and updates first