DR-200 Drive Recorder Status LEDs Troubleshooting

Pro-Vision Drive Recorder (DR-200v2)

Drive Recorder Status LEDs

_____________________________________

Power Status LED (GREEN Color)

OFF: Unlit LED (no color) means the Unit is OFF with no ignition signal.
SOLID GREEN: Unit is ON or powering up with the Ignition Signal ON.
FLASHING GREEN: Unit is ON with the Ignition Signal OFF; Unit is in a time-delayed shutoff state.
_____________________________________

 Recording Status Indicator LED (GREEN/RED Color)

OFF: Unlit LED (no color) means the Unit is OFF.
SOLID GREEN: Unit is ON and recording from at least one camera.
FLASHING GREEN: Unit is ON but not set to record.
FLASHING RED: Unit is ON and set to record but is unable to due to a problem.
_____________________________________

 Wi-Fi Status Indicator LED (AMBER Color)

OFF: Unlit LED (no color) means the Unit is OFF or Unit is on and Wi-Fi is disabled.
SOLID AMBER: Wi-Fi is ON and (AP Mode) – connected to a device or (Client Mode) – connected to a preset network SSID.
FLASHING AMBER (Slow): Wi-Fi is ON and (AP Mode) – not connected to a device or (Client Mode) – not connected to a preset network SSID.
FLASHING AMBER (Fast): Wi-Fi is ON and (AP Mode) - connected to a device and transferring data or (Client Mode) – connected to a preset network SSID and transferring data.
_____________________________________

 4G Status Indicator LED (AMBER color) If equipped

OFF: Unlit LED (no color) means the Unit is OFF, Unit is not 4G capable, 4G is disabled, or 4G is starting.
SOLID AMBER: 4G is ON and connected.
FLASHING AMBER (Slow): 4G is ON but has no connection due to lack of signal.
FLASHING AMBER (Fast): 4G is ON but is transferring data.