Connect to a DVR via Hardline

1. Connect DVR to your laptop or tablet via an LAN connection.

2. Power up the DVR.

3. Go to the network settings on the laptop.

4. Go to change adaptor settings.

5. Find your DVR wifi/LAN connection.

6. Right-click the DVR's connection and go to the properties.

7. Find Internet Protocol 4(IPV4).

8. Go to the Protocol 4's properties.

9. Select "use following IP address".

10. Set the IP address to

11. The subnet mask will auto-fill. Leave everything else blank.

12. "Press "Okay" to save changes.

13. Open a browser window.

14. Go to the IP address for the DVR UI,

Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

Our helpline hours:
8:00am - 7:00pm EDT Monday to Friday
Follow us on LinkedIn
Get the latest news and updates first